[ Content | Sidebar ]

Posts tagged Electrical Ignition System

The 2006 Hyundai Getz Starting/Ignition System

The 2006 Hyundai Getz ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-programmed in the memory of the ECM (Engine Control Module). The engine operating conditions (speed, load, warm-up, condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM. The ignition coil Read more […]

2007 Polaris Scrambler 500 4X4 Electrical Ignition System Wiring

Polaris Scrambler 500 4X4 is powered by a liquid-cooled Polaris 500 High-Output 4-valve, 4-Stroke Single Cylinder. The Scrambler’s power is matched with the traction provided by Polaris On-Demand All Wheel Drive (AWD). Below schematic illustrates the 2007 Polaris Scrambler 500 4X4 Electrical Ignition System and Wiring Diagram. The electrical ignition system consists of: 1. ASM-Ignition coil
2. Plate assembly
3. Stator