The 1993 – 1994 Jaguar XJ6 charging system includes the alternator, an internal voltage regulator, a charge indicator light, load dump module, the battery, an ignition ON relay, an in-line fuse and the wiring between all the components. The charging system supplies electrical power for the ignition system, the lights, the radio, etc. The alternator is driven by a drivebelt at the front of the engine. Below schematic shows the Jaguar XJ6 typical Charging System Circuit. The volt regulator limit the alternator’s voltage to a preset value. This prevents power surges, circuit overloads during peak voltage output.
Jaguar XJ6 Charging System Circuit Diagram
November 14th, 2009
Sponsored Links
Designing 5-band Stereo Equalizer Circuit Diagram using TEA6360
November 13th, 2009
The following file contains detail information on how to design 5-band Stereo Equalizer Circuit Diagram using TEA6360. The 5-band Stereo Equalizer is an 12C-bus controlled tone processor for application in car radio sets, TV sets and music centers. It features five filters for each channel, center frequency, bandwidth and maximum boost/cut defined by external components, two different module addresses programmable. The TEA6360 is performed with two stereo channels (RIGHT and LEFT), each one consists of five equal filter amplifiers.
Designing 5-band Stereo Equalizer Circuit Diagram using TEA6360 continued »
Sponsored Links
Posts