[ Content | Sidebar ]

Archives for Suzuki Car

2001 Suzuki Swift Front Wiper / Washer Wiring Diagram

Suzuki Swift is specifically intended for vehicles upper middle class or working class professionals to young families. ┬áDespite its compact size, while driving the Suzuki Swift will feel comfortable for the driver, because the position of the driver’s foot is still roomy. But the fundamental weakness of the passenger cabin is very narrow and limited. Many female consumers choose Suzuki Swift with automatic transmission, while the men who love speed then would choose a manual transmission, because Read more […]

Suzuki 4×4 SJ413 Alternator and Charging System Circuit

Suzuki 4×4 SJ413 Alternator and Charging System Circuit. The Suzuki 4×4 SJ413 alternator features a solid state regulator that is mounted inside the alternator. All regulator components are enclosed into a solid mold, and this unit along with the brush holder assembly is attached to the slip ring end frame.

Suzuki Grand Vitara Heater Circuit

The Suzuki Grand Vitara heater, an in and out air selectable-type hot water heater, is so constructed that it is possible to assure an agreeable ventilation at all times by providing the ventilator air outlets at the center and both sides (right and left) of the instrument panel, the hot air outlet at a place close to the feet of front passengers, and the defroster air outlets at places, right and left, along the windshield glass. The heater and ventilation consist of following parts: 1. Side Read more […]

Suzuki Jimny Transmission Control Module TCM Electronic Circuit Diagram

The Suzuki Jimny Transmission Control Module (TCM) is an electronic circuit component that controls gear shift, TCC lock-up and idle-up according to the signal from each sensor. Below schematic illustrates the Suzuki Jimny Transmission Control Module TCM Electronic Circuit and Wiring Diagram.

1989 Suzuki Swift GTi Backup Lights Wiring Circuit

The following schematic shows the 1989 Suzuki Swift GTi Backup Lights Wiring Circuit for manual transmission system model. The backup light system consists of: 1. battery; 2. main fuse; 3. mains switch; 4. fuse block; 5. back-up light; 6. back-up light switch.