[ Content | Sidebar ]

Archives for ATV

POLARIS RANGER XP 700 4X4 Rear Differential Solenoid Circuit Diagram

This activates the solenoid and sends 12 volt “Key On” power from the RD/WH wire to the OR/WH wire of the Differential Solenoid. The following schematic illustrates the POLARIS RANGER XP 700 4X4 Rear Differential Solenoid Circuit Diagram.

ATV Polaris Sportsman Xplorer 500 Electronic Throttle Control Switch Testing

The ATV Polaris Sportsman Xplorer 500 electronic throttle control (ETC) disables the vehicle if ‘the re is a mechanical problem in the throttle mechanism. ATV Polaris Sportsman Xplorer 500 Electronic Throttle Control Switch Testing. Use a screwdriver to remove the throttle control cover. Shift the transmission into NEUTRAL and apply the parking brake.

TGB Blade 250 Starting System Circuit

The following schematic illustrates the TGB Blade 250 ATV Starting System Circuit. The starting system consists of shift gear control unit, main switch, starter motor, starter relay, starter switch, and change switch.

Polaris Sportsman Xplorer 500 Starting System Wiring and Circuit

The Polaris Sportsman Xporer 500 ignition exciter and trigger coils are located under the flywheel and are part of the stator assembly. The starting system consists of the starter motor, starter gears, solenoid and the handlebar-mounted starter button.

Yamaha Raptor 350 Electrical System Wiring Diagram

The Yamaha Raptor 350 is powered by a 4-stroke, 348cc, air cooled, SOHC, single-cylinder engine with electric starter in combined with a 6-Speed manual transmission and total fuel capacity is 2.4 gallons. The following schematic illustrates the Yamaha Raptor 350 Electrical System Wiring Diagram.