Polaris Scrambler 500 4X4 is powered by a liquid-cooled Polaris 500 High-Output 4-valve, 4-Stroke Single Cylinder. The Scrambler’s power is matched with the traction provided by Polaris On-Demand All Wheel Drive (AWD). It has carbureted fuel system and electronic ignition system with electric starting system. Polaris Scrambler 500 also equipped with Automatic PVT F/N/R Transmission system, giving better handling and controlling over terrain area.

To provide less stressed and fatigue, Scrambler 500 4×4 is equipped with MacPherson Strut with 8.2″ (20.8 cm) Travel for the front suspension paired with Progressive-Rate Swingarm with 10.5″ (26.7 cm) Travel for the rear suspension. Other features include: Single Lever 4-Wheel Hydraulic Disc with Hydraulic Rear Foot Brake.

Below schematic illustrates the 2007 Polaris Scrambler 500 4X4 Electrical Ignition System and Wiring Diagram. The electrical ignition system consists of:

1. ASM-Ignition coil
2. Plate assembly
3. Stator
4. O-Ring
5. Metal Bearing
6. Spark plug cap
7. Flange Bolt
8. Oil Seal
9. Spark Plug
10. ASM-Screw and washer
11. Flywheel/Ring Gear
12. Screw and washer assembly
13. Band-pulse
14. Coil-pulsar
15. Screw and washer ASM (10)
16. CDI system complete
17. ASM-Plate
18. Bolt
19. Screw
20. BRKT-CDI
21. Pad, bulk fuel
22. Nut

Polaris Scrambler 500 4X4 Electrical Ignition System Wiring



Related Post

Toyota Prado Wire Harness (2000)
1997 Chevrolet Van G1500 Air Conditioning Electrical Circuit and Wiring Diagram
2002 Subaru Legacy Airbag Control Module Schematic
Camaro Ignition Switch Schematic
2009 Range Rover (L322) Alarm and Locking Control Diagram