The following electrical system and wiring diagram apply for 2007 Kawasaki ZZR1400 ABS Ninja ZX14 motosport series. In this manual you will find complete and brief explanation on electrical wiring and wiring inspection, battery (removal, installation, activation, charging), charging system (alternator, stator, and regulator removal, inspection and installation), ignition system, lighting system, air switching valve, immobilizer, switches and sensor.
Ninja ZX14 Electrical Specification
Type: Sealed battery
Model Name: FTZ14-BS
Capacity: 12 V 14 Ah
Voltage: 12.6 V or more
Type: Three-phase AC
Alternator Output Voltage: 51 V or more @4 000 r/min (rpm)
Stator Coil Resistance: 0.05 ? 0.5 ?
Charging Voltage (Regulator/Rectifier Output Voltage): 14.2 ? 15.2 V
Crankshaft Sensor Resistance: 376 ? 564 ?
Crankshaft Sensor Peak Voltage: 2.4 V or more
Camshaft Position Sensor Resistance: 400 ? 460 ?
Camshaft Position Sensor Peak Voltage: 2.8 V or more
Spark Plug Gap: 0.8 ? 0.9 mm (0.031 ? 0.035 in.)
Primary Winding Resistance: 1.2 ? 1.6 ?
Secondary Winding Resistance: 8.5 ? 11.5 k?
Primary Peak Voltage: 72 V or more
Electric Starter System
Starter Motor brush Length: 10 mm (0.39 in.), Service limit 5.0 mm (0.20 in.)
Commutator diameter: 28 mm (1.10 in.), Service limit 27 mm (1.06 in.)
Air Switching Valve Resistance: 18 ? 22 ? at 20°C (68°F)
Switch and Sensor
Rear Brake Light Switch Timing: ON after about 10 mm (0.39 in.) pedal travel
Engine Oil Pressure Switch Connections: When engine is stopped: ON
When engine is running: OFF
Fuel Level Sensor Resistance Full Position: 9 ? 11 ?
Empty Position: 213 ? 219 ?